SURFACE CLEANLINESS

Ascott Shop > INSPECTION & TEST EQUIPMENT > SURFACE CLEANLINESS
BRESLE TEST KIT
Bresle KitBresle Patch

BRESLE TEST KIT

Ref: Bresle Kit

Quantity:   

Choice:
T01-30215 - Bresle Kit 395.00
T01-30216 - Bresle Patches Standard Adhesion (pack 50) 45.00
T01-30217 - Bresle Patches High Adhesion (pack 50) 50.00
T01-30222 - 500ml Bottle Deionised Water 10.00
T01-30223 - Syringes (Pack of 3) 10.00
T01-30224 - Calibration solution 25.00
T01-30225 - 25ml Beaker 5.00
T01-30226 - Conductivity Meter Sensor 195.00


Bresle Patches Conformance Certificate (additional GBP 5.00)

The Bresle Test will measure contamination of water-soluble salts and corrosion products on blast-cleaned steel.
These compounds are almost colourless and are localized at the lowest point of the rust pits.

If they are not removed prior to painting, chemical reactions can result in blister formation and accumulations of rust that destroy the adhesion between the substrate and the applied protective coating.

Supplied in an industrial foam-filled Carrying Case with Bresle Patches (pack of 50 Standard Adhesion), Bresle Patches Plus (pack of 50 High Adhesion), Conductivity Meter, 500ml Deionised Water, 3 × 5ml Syringes, Calibration Solution, Moistening Solution and 25ml Beaker.


Click tabs to expand information

Product
Bresle Kit
Accessory for
Not Applicable
Part Number
T01-30215 to T01-30226
Range
0.1 - 20,000mg/m2 (with DSP Method) Direct sampling procedure.
Accuracy
1% accuracy on gauge
Resolution
0.1 m/mg2 (with DSP method)
Standards
ISO 8502-6 and ISO 8502-9
Features and Benefits
Supplied with: digital conductivity meter, 50x bresle patches & 50 bresle plus patches, 6x 25ml beaker, 200ml distilled water,
20ml syringe with needle, calibration and rinse solution, magnetic bresle test spot marker.
This test described in the ISO 11127-6 and ISO 11127-7 standards helps to prevent that the dissolved salts in the recycled
abrasive media or water will not re-contaminate the surface being cleaned.
Dimensions and Weights (packed)
20 x 30 x 8 cm / 1 kg
Calibration Certificate
N/A
Warranty
1 year

Includes: ship building, bridges, oil platforms, automotive, steel masts, pylons, railways, aerospace, construction, pipelines, tankers, storage tanks, plant machinery, road building, utility companies, flooring companies, sea water construction, universities.


     To send a Technical Support Enquiry about this product only CLICK HERE
     We aim to reply to all queries by the end of the next working day.
     The Ascott Shop is a Internet business and we prefer contact by email.
     If you need to contact us by fax, then please refer to the Terms & Conditions page for our contact details.

     For general enquiries please use the Contact Us page.





People who bought this item also bought:
1. SYRINGES (Ref: SYRINGES)
2. DUST TEST KIT (Ref: DUST TEST)
3. RUST GRADE BOOK (ISO 8501-1:2007) (Ref: T01-30468)

DUST TEST KIT
Dust Test KitTest Comparator Charts

DUST TEST KIT

Ref: DUST TEST

Quantity:   

Choice:
T01-30465 - Dust Test Kit 195.00
T01-30466 - Dust Test Tape 2mm (1") 60m Roll 25.00
T01-30467 - Test Comparator charts (Pack 50) 25.00


Dust Test Tape Conformance Certificate (additional GBP 5.00)

Test Comparator Charts Conformance certificate (additional GBP 5.00)

The Dust Test Kit used in accordance with ISO 8502-3 measures the quantity and size of dust particles on surfaces being prepared for painting. Dust on cleaned surfaces can reduce coating adhesion and leading to premature coating failure or sub-standard coating finish. Kit contains: Dust Test Tape (60m roll), Dust Test Charts (pack of 50) and X10 Illuminated Magnifier.All items are supplied in a industrial foam filled carrying case.


Click tabs to expand information

Product
Dust Test Kit
Accessory for
Not Applicable
Part Number
T01-30465
Range
Not Applicable
Accuracy
Not Applicable
Resolution
Not Applicable
Standards
BS EN ISO 8502-3
Features and Benefits
Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and sub-standard
coating finish.
Dimensions and Weights (packed)
35 x 17 x 10 cm / 1 kg
Calibration Certificate
Not Applicable
Warranty
1 year

Includes: automotive, marine, maintenance, paint and coatings, pipelines, ship maintenance, CCTV, wind farms, construction, bridges


     To send a Technical Support Enquiry about this product only CLICK HERE
     We aim to reply to all queries by the end of the next working day.
     The Ascott Shop is a Internet business and we prefer contact by email.
     If you need to contact us by fax, then please refer to the Terms & Conditions page for our contact details.

     For general enquiries please use the Contact Us page.





People who bought this item also bought:
1. SAFETY GLOVES POLYTHENE (Ref: LAB041)
2. DEFELSKO POSITECTOR SURFACE PROFILE GAUGE (SPG) (Ref: PosiTectorSPG)

RUST GRADE BOOK (ISO 8501-1:2007)
ISO 8501-1:2007Rust Book

RUST GRADE BOOK (ISO 8501-1:2007)

Ref: T01-30468


Price: 325.00

Quantity:   

Used for the visual evaluation of rust and purity levels of non-coated steel. Also known as the "Swedish steel blasting grades" SS 05 59 00 (Sa). The book contains high-quality colour photographs for estimating the rust levels and purity levels of a metal surface after cleaning manually, by machine or after blasting.


Click tabs to expand information

Product
ISO-8501-1 2007 Rust Grade Book
Accessory for
Not Applicable
Part Number
T01-30468
Range
Not Applicable
Accuracy
Not Applicable
Resolution
Not Applicable
Standards
ISO 8501-1
Features and Benefits
Not Applicable
Dimensions and Weights (packed)
35 x 17 x 7 cm / 1 kg
Calibration Certificate
Not Applicable
Warranty
Not Applicable

Includes: Pipeline Inspection, tankers, ships, ballast tanks


     To send a Technical Support Enquiry about this product only CLICK HERE
     We aim to reply to all queries by the end of the next working day.
     The Ascott Shop is a Internet business and we prefer contact by email.
     If you need to contact us by fax, then please refer to the Terms & Conditions page for our contact details.

     For general enquiries please use the Contact Us page.





People who bought this item also bought:
1. BRESLE TEST KIT (Ref: Bresle Kit)
2. MAGNIFYING GLASS (Ref: LAB043)
3. SURFACE ROUGHNESS COMPARATOR (Ref: Roughness Comparator)

FITZ ATLAS OF COATING DEFECTS

FITZ ATLAS OF COATING DEFECTS

Ref: T01-30469


Price: 150.00

Quantity:   

Fitz's atlas 2 of coating defects is a handy pocket size reference manual with over 180 colour images, providing a clear and concise description of all problems that could occur, as well as their possible causes.


Click tabs to expand information

Product
Fitz's Atlas
Accessory for
Not applicable
Part Number
T01-30469
Range
Not Applicable
Accuracy
Not Applicable
Resolution
Not Applicable
Standards
Not Applicable
Features and Benefits
The book is divided into the following sections: Welding faults, Presurface conditions, Dry and wet abrasive blast cleaning,
high pressure water jetting, coating defects, marine fouling. Only available in English.
Dimensions and Weights (packed)
14 x 10 x 0.5cms/0.05 kg
Calibration Certificate
Not Applicable
Warranty
Not Applicable

Automotive, construction, marine, manufacturing, aerospace, CCTV, oil and gas, pipelines, tankers


     To send a Technical Support Enquiry about this product only CLICK HERE
     We aim to reply to all queries by the end of the next working day.
     The Ascott Shop is a Internet business and we prefer contact by email.
     If you need to contact us by fax, then please refer to the Terms & Conditions page for our contact details.

     For general enquiries please use the Contact Us page.




Got to the Ascott On-line Shop
Got to the Ascott Analytical Equipment website