THICKNESS GAUGE - CALIBRATION FOILS

Ascott Shop > INSPECTION & TEST EQUIPMENT > THICKNESS GAUGE - CALIBRATION FOILS
COATING THICKNESS METER CALIBRATION FOILS

COATING THICKNESS METER CALIBRATION FOILS

Ref: CALIBRATION FOILS

Quantity:   

Choice:
T01-53065 - Calibration Foils 0-1000µm (25,50,75,125,175,250,500,750µm) 45.00
T01-53066 - Calibration Foils 0-40mils (1,2,3,5,7,10,20,30mils) 45.00
T01-53067 - Calibration Foils 0-2000µm (50,250,500,750,1000,1250,1500,2000µm) 45.00
T01-53068 - Calibration Foils 0-80mils (2,10,20,30,40,50,60,80mils) 45.00
T01-53069 - Calibration Foils 0-5.00mm (50,250,500,750,1000,1500,2000,3000µm) 45.00
T01-53070 - Calibration Foils 0-200mils (2,10,20,30,40,60,80,120mils) 45.00
T01-53071 - Calibration Foils 1-20.0mm (5,9.5,15mm) 50.00
T01-53072 - Calibration Foils 1-800mils (200,360,600mils) 50.00


Calibration Foils Calibration Certificate (additonal GBP 25.00)

Calibration Foils are required for the calibration of Coating Thickness Meters.

Each individual Calibration Foil is measured in the centre and the value is printed on the attached label.

Supplied in packs of eight in a protective Wallet.

Special Range Calibration Foils can Be supplied, made up of any 8 values as listed:
12µm , 25µm, 50µm , 75µm , 100µm , 125µm , 150µm , 175µm , 190µm , 200µm , 225µm , 250µm , 275µm , 300µm , 350µm , 375µm , 500µm , 625µm , 750µm , 1000µm , 1250µm , 1500µm , 2000µm , 3000µm. (values shown are nominal values.). PLEASE CONTACT US FOR THIS REQUIREMENT.

The Calibration Certificate with traceability to UKAS is an optional extra.



Click tabs to expand information

Product
Calibration Foils
Accessory for
Coating Thickness Meter (T01-53050 to T01-53056)
Part Number
T01-51375 & T01-51380
Range
0 to 3000µm
Accuracy
±2 µm (±0.08 mil)
Resolution
25 µm (1 mil) to 3000 µm (120 mil)
Standards
Traceable to NIST
Features and Benefits
These foils can be applied to all ferrous- or non-ferrous metal substrates.
Dimensions and Weights (packed)
31 x 22 x 0.5 cm / 0.2 kg
Calibration Certificate
Optional Extra
Warranty
1 year

Includes: automotive, marine, maintenance


     To send a Technical Support Enquiry about this product only CLICK HERE
     We aim to reply to all queries by the end of the next working day.
     The Ascott Shop is a Internet business and we prefer contact by email.
     If you need to contact us by fax, then please refer to the Terms & Conditions page for our contact details.

     For general enquiries please use the Contact Us page.




DEFELSKO PLASTIC SHIMS
LD5417 - Plastic Shims

DEFELSKO PLASTIC SHIMS

Ref: SHIMS

Quantity:   

Choice:
T01-51375 - Non-Certified Plastic Shims, set of 5 13.00
T01-51070 - Set of 8 Certified Shims 140.00
T01-51380 - Defelsko Individual certified shim 30.00

Certified coating thickness standards are used for verifying the accuracy and operation of coating thickness gauges and are an important component in fulfilling bot ISO and in-house quality control requirements.
Individual certified foils available in the following thicknesses 25/50/75/125/250/500/1000/1500 µm.


Click tabs to expand information

Product
T01-51375 - Set of 5 Non Certified Shims
T01-51380 - Defelsko Individual certified shim
Accessory for
Not Applicable
Part Number
T01-51375 & T01-51380
Range
25 to 500µm
Accuracy
±2 µm (±0.08 mil)
Resolution
25 µm (1 mil) Orange ± 20%, 50 µm (2 mil) Red ± 10%, 125 µm (5 mil) Blue ± 5%, 250 µm (10 mil) Brown ± 5%, 500 µm (20 mil) Yellow ± 5%
Standards
Traceable to NIST
Features and Benefits
These foils can be applied to all ferrous- or non-ferrous metal substrates.
Dimensions and Weights (packed)
31 x 22 x 0.5 cm / 0.2 kg
Calibration Certificate
n/a
Warranty
1 year

Includes: automotive, marine, maintenance


     To send a Technical Support Enquiry about this product only CLICK HERE
     We aim to reply to all queries by the end of the next working day.
     The Ascott Shop is a Internet business and we prefer contact by email.
     If you need to contact us by fax, then please refer to the Terms & Conditions page for our contact details.

     For general enquiries please use the Contact Us page.





People who bought this item also bought:
1. POSITECTOR 6000 GAUGE WITH 90 DEG MICRO PROBE - (0 to 25 mils) (Ref: F90S Gauges)
2. POSITECTOR 6000 GAUGE WITH 45 DEG MICRO PROBE - (0 to 25 mils) (Ref: F45S Gauges)
3. POSITECTOR 6000 GAUGE WITH SEPARATE PROBE - (0 to 60 mils) (Ref: NS Gauges)

DEFELSKO GAUGE CALIBRATION PLATES

DEFELSKO GAUGE CALIBRATION PLATES

Ref: Standards


Price: 250.00

Quantity:   

Choice:
T01-51075 - 0, 75, 250, 1500µm - STD S1 (Suitable for PosiTector 6000 F, FS, FRS, FN, FNS, FNRS & PosiTest F & FM)   
T01-51076 - 0, 75, 250, 1000µm - STD S2 (Suitable for PosiTector 6000 F0S, F45S, F90S & PosiTest DFT Ferrous & Combo)   
T01-51077 - 0, 15, 40, 100µm - STD S3 (Suitable for PosiTest G, GM & PosiPen)   
T01-51078 - 0, 75, 250, 1500µm - STD A1 (Suitable for PosiTector 6000 N, NS, NRS, FN, FNS, FNRS)   
T01-51079 - 0, 75, 250, 500µm - STD A2 (Suitable for PosiTector 6000 NAS, N0S, N45S, N90S & PosiTest DFT Combo)   
T01-51080 - 75, 125, 250, 500µm - STD A3 (Suitable for PosiTector 100B, 200 & 200B)   

Certified Coated Metal Plates are the best solution for verifying the calibration, accuracy and operation of most magnetic, eddy current or ultrasonic coating thickness gages including magnetic pull-off gages as well as many competitive models. They fulfill both ISO and in-house quality control requirements. At ±0.43µm (±0.017 mil) Certified Coated Metal Plates are our most accurate solution.


Click tabs to expand information

Product
Defelsko Ferrous Gauge Calibration Plates
Accessory for
Coating Thickness Gauges
Part Number
T01-50175 to T01-51080
Range
0 to 1500 µm
Accuracy
±0.43 µm
Resolution
Not applicable
Standards
Defelsko certified standards are traceable to the National Metrology Institution in the USA
Features and Benefits
Epoxy on steel plates for Ferrous Gauge calibration. Calibration set features a zero plate 0 µm, a 75 µm epoxy coating on a
steel plate, a 250 µm coated plate and a 500 µm coated plate.
Dimensions and Weights (packed)
12 x 12 x 0.5cms/ 1 kg
Calibration Certificate
Individually serialized for traceability to NIST or PTB includes a Certificate of Calibration, Certified and labeled in both Metric
and Imperial units
Warranty
1 Year


Calibrate coating thickness gauges, calibrate ferrous gauges


Click play to watch video


     To send a Technical Support Enquiry about this product only CLICK HERE
     We aim to reply to all queries by the end of the next working day.
     The Ascott Shop is a Internet business and we prefer contact by email.
     If you need to contact us by fax, then please refer to the Terms & Conditions page for our contact details.

     For general enquiries please use the Contact Us page.





People who bought this item also bought:
1. POSITECTOR 6000 GAUGE WITH INTEGRAL PROBE - (0 to 60 mils) (Ref: F1 / F3 Gauges)
2. POSITECTOR 6000 GAUGE WITH RIGHT ANGLE PROBE - (0 to 60 mils) (Ref: FNRS Gauges)
3. POSITECTOR 6000 GAUGE WITH SEPARATE PROBE - (0 to 60 mils) (Ref: NS Gauges)

DEFELSKO CERTIFIED POLYSTYRENE BLOCKS

DEFELSKO CERTIFIED POLYSTYRENE BLOCKS

Ref: BLOCKS


Price: 165.00

Quantity:   

Select the Standard that most closely matches the measuring range of your gauge
T01-51081 - Block Thicknesses - 375, 2, 4.5, 6.5µm - STDP1 (Suitable for PosiTector 6000 FT, FTS, NTS, & FNTS)   
T01-51082 - Block Thicknesses - 2.5, 6.5, 13, 19µm - STDP2 (Suitable for PosiTector 6000 FHS, NHS, EOC)   
T01-51083 - Block Thicknesses - 375, 1.5, 2.5, 4.5µm - STDP3 (Suitable for PosiTector 100 C)   
T01-51084 - Block Thicknesses - 1.5, 2.5, 4.5, 6.5µm - STDP4 (Suitable for PosiTector 100 D)   
T01-51085 - Block Thicknesses - 1.5, 2.5, 6.5, 12µm - STDP5 (Suitable for Positector 6000 FKS, NKS)   
T01-51086 - Block Thicknesses - 375, 1.5, 2.5, 3µm - STDP6 (Suitable for PosiTector 200 C)   
T01-51087 - Block Thicknesses - 1.5, 4.5, 6.5, 9.5µm - STDP7 (Suitable for PosiTector 6000 FHXS)   

Certified Polystyrene Blocks are for use with gages that measure over 1500 µm (60 mils).
They are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.


Click tabs to expand information

Product
Certified Polystyrene Blocks
Accessory for
Coating Thickness Gauges
Part Number
T01-51081 - T01-51084
Range
1.5 to 375µm
Accuracy
±2 µm
Resolution
Not applicable
Standards
Not applicable
Features and Benefits
Certified Polystyrene Blocks are for use with gages that measure over 1500 µm (60 mils).
Dimensions and Weights (packed)
15 x 15 x 0.3cms/ 0.1 kg
Calibration Certificate
All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB
Warranty
1 Year

Calibrate coating thickness gauges


     To send a Technical Support Enquiry about this product only CLICK HERE
     We aim to reply to all queries by the end of the next working day.
     The Ascott Shop is a Internet business and we prefer contact by email.
     If you need to contact us by fax, then please refer to the Terms & Conditions page for our contact details.

     For general enquiries please use the Contact Us page.





People who bought this item also bought:
1. POSITECTOR 6000 GAUGE WITH SEPARATE PROBE - (0 to 250 mils) (Ref: FTS Gauges)
2. POSITECTOR 6000 GAUGE WITH SEPERATE PROBE - (0 to 500 mils) (Ref: NKS Gauges)

Got to the Ascott On-line Shop
Got to the Ascott Analytical Equipment website