HYDRAULIC ADHESION TESTER

Ascott Shop > INSPECTION & TEST EQUIPMENT > ADHESION TESTER > HYDRAULIC ADHESION TESTER
HYDRAULIC ADHESION TESTERS (HATE)
HATE TesterHydraulic Adhesion Tester

HYDRAULIC ADHESION TESTERS (HATE)

Ref: HATE ADHESION TEST

Quantity:   

Choice:
T01-01000 - Standard Hydraulic Adhesion Tester 1,195.00
T01-01005 - Right-Angle Hydraulic Adhesion Tester 1,295.00


UKAS Calibration Certificate for Adhestion Tester (additional GBP 25.00)

PAT Certificate for Heated Dolly (additional GBP 25.00)

The HATE Adhesion Tester or Pull Off Tester is one of the most accurate and versatile adhesion testers currently available. It measures the adhesion bond strength of applied coatings with ease and precision.The adhesion is measured by the tensile pull on a Dolly glued to the coating surface. The force is applied through the centre of the Dolly by a hydraulically loaded pin. This ensures an exactly central point loading of the force.
Adhesion values are recorded by a pressure gauge giving a 1:1 pressure reading. This is made possible as the net surface area of the Dolly is equal to the surface area of the hydraulic piston bore. Pressure reacted by the Dolly is the same as the pressure in the bore and is transmitted directly to the pressure gauge. The maximum value achieved at Pull-off is recorded by a reset needle that is easily read on the large scale of the pressure gauge.

UKAS Calibration certificate available at extra cost. (tick box to order)

Supplied as standard: Industrial Foam-Filled Carrying Case with 5 Flat Dollies, Adhesive, Heated Dolly Remover, Dolly Cleaning Tool and Dolly Plug.


Click tabs to expand information

Product
Hydraulic Adhesion Tester
Accessory for
N/A
Part Number
T01-01000 - Standard Hydraulic Adhesion Tester
T01-01005 - Right Angle Hydraulic Adhesion Tester
Range
0-2600PSI (0-18MPa)
Accuracy
+/- 1%FSD
Resolution
As per standard
Standards
ISO 16276-1, ISO 4624, ASTM D4541, NFT 30-606
Features and Benefits
Can test both external and internal surfaces of pipes. Because the load is reacted internally within the Dolly, curved surfaces
of pipes can be easily tested. To obtain a uniform tensile load, curved Dollies machined to match the diameter under test
need to be used. External diameters as small as 25mm (1") and internal diameters as small as 150mm (6") can be tested.
Dimensions and Weights (packed)
4kgs - 50 x 50 x 25 cms
Calibration Certificate
Available at extra cost
Warranty
1 Year

Includes: automotive, ship building, construction, bridges, steel structures, oil and gas platforms, railways, aerospace, aviation, mobile phone masts, wind farms, pipelines, tankers, storage tanks, pylons, metal furniture, toy manufacturers.


     To send a Technical Support Enquiry about this product only CLICK HERE
     We aim to reply to all queries by the end of the next working day.
     The Ascott Shop is a Internet business and we prefer contact by email.
     If you need to contact us by fax, then please refer to the Terms & Conditions page for our contact details.

     For general enquiries please use the Contact Us page.




HYDRAULIC ADHESION TEST DOLLIES
Concave Dolly - External pipe testsConvex Dolly - Internal Pipe testsFlat Dolly - Flat Substrates

HYDRAULIC ADHESION TEST DOLLIES

Ref: DOLLIES

Quantity:   

Choices:

A range of stainless steel hydraulic adhestion test dollies for use with the above HATE Testers (T01-01000 & T01-01005) for when it is necessary to test the adhesion bond of a coating to a curved substrate. Concave dollies can be used with both models of Hydraulic Adhestion tester (standard & right angle) for testing the external surfaces of pipes. Convex dollies can only be used with Right-Angled tester (T01-01005) for internal pipe testing.
Connection to the stainless steel Dolly is easily made with a snap-on connector.


Click tabs to expand information

Product
Concave & Convex Dollies
Accessory for
Hydraulic Adhesion Tester
Part Number
T01-01008 to T01-01032
Range
From 2'' to 36'' diameter pipes
Accuracy
N/A
Resolution
N/A
Standards
N/A
Features and Benefits
Can be used to test on pipes from 2" to 36" diameter, select the dolly closest to the diameter of your pipe.
Dimensions and Weights (packed)
31 x 22 x 0.5 cm / 0.2 kg
Calibration Certificate
n/a
Warranty
1 year

Includes: automotive, marine, maintenance


     To send a Technical Support Enquiry about this product only CLICK HERE
     We aim to reply to all queries by the end of the next working day.
     The Ascott Shop is a Internet business and we prefer contact by email.
     If you need to contact us by fax, then please refer to the Terms & Conditions page for our contact details.

     For general enquiries please use the Contact Us page.




Got to the Ascott On-line Shop
Got to the Ascott Analytical Equipment website