COLOUR ASSESSMENT CABINET

Ascott Shop > INSPECTION & TEST EQUIPMENT > COLOUR ASSESSMENT CABINET
COLOUR ASSESSMENT CABINET

COLOUR ASSESSMENT CABINET

Ref: COLOR

Quantity:   

Choice:
T01-700500 - Color Assessment Cabinet w/4 light sources, D65,T84,F/A,UV 510.00
T01-700505 - Color Assessment Cabinet w/5 light sources, D65,T84,F/A,UV & CWF 580.00
T01-700510 - Color Assessment Cabinet w/ 6 light sources, D65, T84, F/A, UV, CWF & U30 650.00
T01-700515 - 45 Degree Normative Stand 65.00
T01-700520 - A set of 6 replacement lamps for T01-700510 160.00

Illuminated Colour assessment cabinet which can be supplied with upto 6 variations of light source, D65, TL84, CWF, F/A, UV & U30 which are suitable for the inspection of various surfaces inks, paints, textiles, leather, knitwear, food, paper, plastic etc.
The light source is selectable and can all be on at the same times if required. The supply of lights are controlled by a microprocessor LCD Screen that shows each Lighting usage Time.
Each light source is controlled by an individual button. The CLR Clear button allows the resetting of the Lighting Usage Time to ZERO when new lights are replaced.
The ON/OFF Switch button must be switched off during long hours more than 3 to 4 hours of non-operation. This is to reduce the possibility of heat-up as well as to increase life span of the electronic ballast,

The optional Diffused Glass Panel below the lights ensures the elimination of direct reflection of lights to viewing products, There is no Warm-Up time/Flickering of Lights when there is a constant electrical supply. All electrical components used are of low power consumption and heat generation for energy efficiency in.

The internationally approved Light Gray Non-Reflective Surface ensures that no light is being reflected from the surface during colour matching, So, what you see of your products in our Color Assessment Cabinets will be as natural as what you view them under the natural colour matching conditions.

The Non-Reflective Surface has certain degree of roughness not only acts as light absorption when light are illuminated, but it is also scratched-resistance, Many Colour-Matching Cabinets do not have this dual ability.

In accordance with ASTM D1729 & ISO 3664



Click tabs to expand information

Product
Color Illumination Assessment Cabinets
Accessory for
Not applicable
Part Number
T01-700500 - T01-700520
Standards
ASTM D1729 & ISO 3664 & ISO 3668
Technical Parameters
D65 Artificial Daylight D65 Fluorescent (ISO 3668) 2 x bulbs , Power @ 18W, Colour Temperature @ 6500K
TL84 Department store light TL84 Fluorescent - 2 x bulbs , Power @ 18W, Colour Temperature @ 4000K
CWF Cool White Fluorescent - 2 x bulbs , Power @ 18W, Colour Temperature @ 4150K
F/A Home Light Incandescent - 4 x bulbs , Power @ 40W, Colour Temperature @ 2700K
UV Ultraviolet Light Source - 1 x bulb , Power @ 20W,Wavelength @ 365nm
U30 Warm White Fluorescent - 2 x bulbs , Power @ 18W, Colour Temperature @ 3000K
Weights & Dimensions
35kgs - 710 x 530 x 570mm
Calibration Certificate
As Standard
Warranty
1 year

inks, paints, textiles, leather, knitwear, food, paper, plastic etc.


     To send a Technical Support Enquiry about this product only CLICK HERE
     We aim to reply to all queries by the end of the next working day.
     The Ascott Shop is a Internet business and we prefer contact by email.
     If you need to contact us by fax, then please refer to the Terms & Conditions page for our contact details.

     For general enquiries please use the Contact Us page.




Related products:
1. STARGLOSS GLOSS METERS (Ref: GLOSS)
2. INTELLIGENT GLOSS METER (Ref: INTELLIGENT GLOSS)

Got to the Ascott On-line Shop
Got to the Ascott Analytical Equipment website